[pirracs]

Re: Indesit iwde126 drum keeps filling with water

Thanks. In my case all the time the washing machine is “doing something” it is filling water slowly. At the end of the program you can hear a “buzz sound” and the water is filling in. Same thing goes with spinning or drying program: there is water filling in slowly. As a workaround I also do like the original poster (closing the water inlet) just before the spinning step. I have changed the valves and the pump switch and the front panel with no joy. Tonight I will try
with the PCB but I’m scared not to be able to wire it again properly.

It can only be the PCB right?

Thanks!

[pirracs]

Re: Indesit iwde126 drum keeps filling with water

Hi, I have exactly the same problem (100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d})!!! Initially I thought it was the valve and I changed it but it’s exactly as above: the machine fills water even when in drying mode so it has to be the PCB.
I have access to an old machine exactly the same for spare parts. Could you please let me know if I can remove the PCB and install it on mine?
Did you fix yours? (Thanks god I read this as I was about to buy a new one)

Thanks in advance

[Author]

Posts