[PL]

Re: Whirlpool AWM 5125

Thanks Gegsy

I shall read it and see if things improve. I was wondering if there just might be something up with the heating element / thermostat ?

Once again thanks for your advice

[PL]

Re: Schreiber problem

Hi there

For what its worth I had a problem with my schreiber freezer, the same model as yours. I fitted a new control board and it sprang into life.

I ordered the board from the white goods site I think it was about £50

The procedure in changing the board is very simpleand can be performed by anyone.

Procedure
1: Turn off the power
2: Remove any screws fastening that are securing the freezer in its place under the worksurface
3: Pull the unit out about 6 inches
4: On the top of the freezer you will see a plastic cover which is grey in colour. This pops out very easily
5: Remove the plastic rod that goes through the circuit board and alters the temprature. This can be pulled out
6: Pull the circuit board up and remove the two connectors
7: before you replace the board make sure that you turn the temperature control as far as it will go in an anti clockwise direction. ( this will ensure the teperature control rod slides back into the freezer in the zero position)
8: Put the two connectors onto the board and place the board back into its position
9: Put the plastic rod back through the location hole in the front of the freezer and make sure it is in the zero position
10: Last but not least replace the grey cover and push the freezer back into position. Turn the power oin and that should be that

I hope this helps It certainly worked for me

Best regards Pat

[PL]

Re: Schreiber APP6403

Thanks Dave

I will go out and buy one. Next question is it easy to change ? I wouldn’t want the wife to do anything too tricky !! 😀

[Author]

Posts