powdies

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 9, 2009 at 3:43 pm in reply to: dead tecnik 795/2 – electrical fault #270946
    powdies
    Participant

    Re: dead tecnik 795/2 – electrical fault

    Dishwasher now fixed! I discovered these fabulous people (via eBay):
    http://www.qer.biz/servReps.htm.
    They test and fix PCBs. I sent them our PCB and got it back fixed for just over £50 – bargain! Dishwasher now perfect again. Many thanks for your help which put me on the right track.

    December 9, 2008 at 10:00 am in reply to: dead tecnik 795/2 – electrical fault #270945
    powdies
    Participant

    Re: dead tecnik 795/2 – electrical fault

    Thanks for your help on this! We’ll take a look. Fingers crossed..

    December 8, 2008 at 7:53 pm in reply to: dead tecnik 795/2 – electrical fault #270943
    powdies
    Participant

    Re: dead tecnik 795/2 – electrical fault

    Thanks for your reply Penguin45. The E-nr is SE6TIE1GB/29. The FD number is 8210. Other numbers etched on door top are Typ S9W1TI and 88027. We reseated all the connectors, which did, however seem firm in the first place. The machine has been in operation for 5 years, does that make a dry joint unlikely or could it take so long to show up?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)