[precession]

Re: Bosch sgs43a52 Classixx Problem

Hi Penguin

I’m afraid clogging isn’t the problem, as I’ve completely dissassembled and reassembled the pressure switch.

2 questions: I’m assuming the pressure switch is supposed to trigger when there is enough water in the machine to start a wash? Is the float switch supposed to be a ‘fail-safe’ if water cannot flow into the machine / or if machine is full without pressure switch operating?

As I say, I’ve tested the pressure switch by blowing gently into it and it works okay and looks clean. The microswitch and blue rocker actuator are okay.

So where to go from here? Is there any other place the flow into the machine could be blocked? I’ve cleared the pipe running under the machine at the front.

Cheers

Phil

[Author]

Posts