[presser]

Re: Miele G660-2

Dave_Conway wrote:Thanks, the customer doesn’t know how to tell 🙄 so I’ve asked him to send a picture.

Presumably the spray arm will have a hole straight through the centre if the middle spray arm is supplied from the roof inlet ?

Dave.

Yep.

[presser]

Re: Miele G660-2

qas wrote:

Not sure exactly what the codes mean, but the SC version is about twice the price – could be stainless rather than plastic

The SC version is exactly that,its only for the SC version.The SC non SC split is also identified by serial number.

[presser]

Re: Miele G660-2

Dave_Conway wrote:Thanks chaps 😀

Are there two versions then ?

Cheers

Dave.

Well spotted 😳 If the machine has a single feed pipe (ie the middle spray arm is fed from the roof via a funnel) then see qas’s post.If on the other hand it has two feed pipe’s(middle spray arm fed via the back wall through its own tube) then the plaudits are all mine 8) .

[presser]

Re: Miele G660-2

Spray arm top:4803194

Locknut :4802013(my lot generally replace this at the same time)

There you go,
HTH

[Author]

Posts