[profitxchange]

Re: Hoover VHV Sensor VHW 654D error code 11

Hi Don/Martin just to let you know problem fixed – it was the connection to the thermistor – wire had broken at the crimp on the spade terminal. New spade connector, wire sleeved with some IR sleeving crimped and soldered. probably better than new.

Thanks very much for your help.

[profitxchange]

Re: Hoover VHV Sensor VHW 654D error code 11

Hi

Thanks for being so understanding – you have obviously bumped into silver surfers like me before

Thanks Again

[profitxchange]

Re: Hoover VHV Sensor VHW 654D error code 11

Oops!! Had a senior moment.
The washing machine is actually a Hoover not Hotpoint.
Does that make a difference to the error code diagnosis.
The rest of the information is correct.
Thanks.

[profitxchange]

Re: Hoover VHV Sensor VHW 654D error code 11

Thanks Martin for your quick reply and suggestions

I will going round this evening to see what I can do – at least I have some idea what I am looking for

Thanks again.

[profitxchange]

I found the battery compartment for the pilot light ignition as suggested at the bottom of the chassis behind the drop down flap.

For anyone else who has a Parkinson Cowan Renown Deluxe gas cooker Model REND50WN. The battery compartment was easily located in a small black plastic box on the left side when flap opened
I replaced the single AA battery and the pilot light ignition worked once more.
Thanks for your help.

[profitxchange]

Thanks for quick responses. I’m not at home at the moment, but will try your suggestions later today and let you know if I need further help.
Thanks again.

[profitxchange]

Wow – thanks for the fast response I will give them a call

Thanks again

[profitxchange]

Re: Permutit 8.32 Manual

Hi Sorry for the delay – been away.

The only instructions I was able to get from here were installation instructions.

Having now used the softner for about a year I might be able to help with any simple aspects.

Regards

[profitxchange]

Have PM’d Saracen921

Thanks for your help.

[profitxchange]

Re: Permutit 8.32 Manual

Hi

Thanks for the nudge!

I had been checking my post for a while but not this year as I presumed no one had any info.

We have the softner working (and it has been serviced) but I would very much appreciate any user/instructions or manuals so that I can understand what is going on and how to keep it going.

Are you able to help

Thanks

[profitxchange]

Re: too cold

Might be worth checking it has been mounted correctly – sounds as though it thinks the fridge is too warm and so not cutting out at the right time.

[Author]

Posts