[pupton]

Re: Zanussi is bust but not giving me any clues

Found out how to get into the fault finding menu finally. Got an error code…E66 Apparently means Heater relay always open.

Managed to free off the relay by giving it a thump.
Not sure how long that will last but it’s working for now. 🙂

[pupton]

Re: Zanussi is bust but not giving me any clues

I will get the meter out. Thanks for the advice.
Not optimistic though. According to manual door open should give error E40 and failure to drain should give E20. Program never starts I don’t think I’m getting as far as even locking the door. there’s no error if I try to start with door open the manual suggests it should pick that up with E40.

[Author]

Posts