Forum Replies Created
-
Posts
-
Re: Dishwasher heater control
Thanks Dave. It’s cold fill and enough to steam my glasses up When I open the door but the machine sits there on 1 at the end trouble is you don’t know if it’s an error code 1 or just stuck on the end of the cycle if you see what I mean. Thanks for your help or further info on this timer or where I can find it.
Re: Bosch not empting at end of cycle
Pwcomp wrote:
timdowning wrote:
Does it heat?you know I’m not a 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure but I don’t think it did.
I just checked the heater element it had a resistance of 2.9 Mohms? Is tha t good or bad seems high to me but I have no idea what it should be.
Re: Bosch not empting at end of cycle
timdowning wrote:Does it heat?
you know I’m not a 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure but I don’t think it did.
Re: Bosch not empting at end of cycle
Martin wrote:Most likely reason is that the pump is worn and needs replacing. That it appears to drain out fine with the red float manual intervention but when it attempts to drain very hot rinse water it seizes up.
The other possibility is that the drain outlet is partially restricted somewhere along its route causing the program to ‘time out’. It only has some 60 seconds to drain so any restriction can result in the effect you are experiencing.
It’s a brand new pump fitted and dumped pretty quick. Thanks for you reply.
