quilkin

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 2, 2011 at 5:38 pm in reply to: Blomberg 1501AAA control PCB #356478
    quilkin
    Participant

    Re: Blomberg 1501AAA control PCB

    All working now, thanks.
    Just repaired the PCB tracks and dried out the door switch unit. It’s when the connectors get wet that the current going to the 30k resistor gets too high and blows the tracks on the control PCB. Nothing wrong with the door switch itself. So no new parts required except for a bit of wire. Calling Comet would have cost £150 plus £200 for a new control PCB.

    July 31, 2011 at 4:03 pm in reply to: Blomberg 1501AAA control PCB #356476
    quilkin
    Participant

    Re: Blomberg 1501AAA control PCB

    Dave, many thanks for the quick reply. Yes, after taking out and putting back the motor etc I was told that ‘the door LED had been flickering’ ! Wish I was told earlier…. So can I can I buy a new door lock, but more importantly how do you remove the PCB so that I can get to the connections? I can’t find where it is fixed!
    Chris

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)