Forum Replies Created
-
Posts
-
When activating the paddle, the pump doesnt kick in, the only noise it from the paddle switch,
Where can i locate the pump, and the filter to that point
Hi thanks for this, I have now included the information from the barcode sticker.
Since my last post, where i had to plug in the water pipe in teh back of the water tank in the fridge, I am no longer now getting any supply of water to the ice cube maker, sometimes only a little bit of water, where as the cube make was working fine.
I have since, taken the dispenser off, cleaned it and checked all plugged connections,
I have checked the dispenser actuator switch, cleaned it and made sure its connections are good and clicking.But i also forgot about the paddle, once pressed teh LED lights use to work, they also dont work.
Do i have anyway of forcing/purging water through the pipes to test the flow through connections to test if theyy are blocked …. is there a function to be able to purge water thru the system at all, currently only test i can do is take out the water tank in the fridge, and push it back in to make sure the sensor works. it whirrs and blows air back into the tank, apart from that I am not sure what other tests i can do…
ideas anyone
