rangerover

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: smeg DF410W #297783
    rangerover
    Participant

    Re: smeg DF410W

    done that, getting water from both impellers but not getting wet. seems to be plenty of water in machine though, dishes till not clean.

    in reply to: smeg dishwasher #291344
    rangerover
    Participant

    Re: smeg dishwasher

    Hi again
    I have ordered the spares that i think i need and put the machine back together to to keep things tidy .Wife in her wisdom she tried it and damn me if its not working ok.
    What the hell shes happy Thanks again for your help

    in reply to: smeg dishwasher #291343
    rangerover
    Participant

    Re: smeg dishwasher

    yes your right about that thanks for yuor time and help . I will get a new one and see what happens. Thanks again

    in reply to: smeg dishwasher #291341
    rangerover
    Participant

    Re: smeg dishwasher

    found the cap fixed to side of motor only got a digatal multimeter reading starts at 1.000 on cap goes to -0.001 and stays there looks a right pig of a job to change. The base of the machine looks to be solid which will mean splitting it looks like a big job

    in reply to: smeg dishwasher #291338
    rangerover
    Participant

    Re: smeg dishwasher

    yes understand what you are saying, have just run machine empty opened door fast and can confirm that water is now coming through the bottom spray arm. will put it back together and see what happens, how can i check the capacitor and motor or is it just replace it and hope for the best?

    in reply to: smeg dishwasher #291336
    rangerover
    Participant

    Re: smeg dishwasher

    Hi yes i can hear the spray arms working but i think it is just the top one. I have got the back and side off the machine and checked for blockage none found. took the bottom spray arm off and checked over seems ok just thinking off running machine with sides off to see if pump works but think it must be because the top spray seems to be working?

Viewing 6 posts - 1 through 6 (of 6 total)