[Redactora]

Re: Logik Washing Machine l612wm15 fault

I had the same problem and contacted KnowHow (Curry’s technical support outsource). They have a memo, given to them by the washing machine manufacturer to help with this question:

“Select the temperature you want by pressing the Temp button. If you select, say, 40C a stationary light will appear near ’40C’ for 3 or 4 seconds indicating that this is the temperature setting you have chosen. After 3 or 4 seconds, the light will start blinking at the top of the display (beside 60C). This indicates the point in the cycle, i.e. Wash, is ready to begin and NOT THAT THE TEMPERATURE HAS CHANGED.”

So now we know.

Redactora

[Redactora]

Re: Logik Washing Machine l612wm15 fault

I have the same problem: if the LH light indicates where the machine is in its programme – wash, rinse, spin, end – how do you know what temperature it’s operating at? I press the Temp button and the light moves down to 30C, which I want, but then goes back to the top to indicate Wash. How do you confirm the wash temperature?

[Author]

Posts