RendiliToo

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Bosch Classixx dishwasher turns itself off mid program #457847
    RendiliToo
    Participant

    Re: Bosch Classixx dishwasher turns itself off mid program

    Just had the dishwasher out completely and checked:

      the water pipe and waste pipe no kinks and all looks good
      tested the water in and water pressure should be good

    The only thing i had a little query on was a fitting behind the top shelf which seals in to the holes at the back for the top spray arm spinner. It is very loose in the back of the shelf but seems to marry up with the holes at the back.

    Could something around this area stop and turn off the dishwasher mid program like?

    Any other areas i could look at?

    in reply to: Bosch Classixx dishwasher turns itself off mid program #457846
    RendiliToo
    Participant

    Re: Bosch Classixx dishwasher turns itself off mid program

    Hi, Thanks very much for your reply and theory.
    I have just taken a look and it looks like the door shuts ok and square, but to be honest i dont know what is going on with the door latch. Manually pushing it and it is not smooth and free, but i dont know how it should be.
    What does the left push lever meant to do and when should it be activated? when i manually push it the top latch jumps down and seems to lock in place, but the noise this makes does not happen when shutting the door. And only with shutting the door and opening again can i get the latch to go back up, i cant push it up.

    Should shutting the dishwasher door push the lever so that the latch jumps down? (i have no idea whether it does this when shutting the door or not, but the sounds it makes when i do it manually with the door open is quite loud and i dont think it makes this sound when shutting the door)

    Also, directly above the latch on the top (under the top cover) there is a plastic arm that i can pull and then move to the left, and it moves some metal sounding mechanism, what does that do?

Viewing 2 posts - 1 through 2 (of 2 total)