[revit]

Re: INDESIT WG1230G

All sorted so far so good, although the machine now sounds a bit thrashy at certain rpm’s but apart from that seems to be flying ok with the new brushes.

I assume the bearings are worn as well hence why it is a little nosiy.

Thanks for your help
😆

[revit]

Re: INDESIT WG1230G

Fair comment if I am honest I forgot this site sold spares as would have purchased from here just because of the advice received, will buy from here in future. Rgds
:rolls:

[revit]

Re: INDESIT WG1230G

Got new brushes from ebay, got them today wrong ones sent them back waiting for replacements the olds look really worn down!

[revit]

Re: INDESIT WG1230G

OK guys had a look at the brushes took em out and cleaned them up! the motor is now working again although the high speed spin seems to work some times and not others. I have order new brushes anyway for a tenner from ebay as they looked very low. Will change em and see what happens!

Cheers for your help! Will post an update as and when brushes installed.

[revit]

Re: INDESIT WG1230G

Thanks guys, will take a look at the motor tonight to see if the brushes are the cause. Thanks for the link for the Switch repair it could mean there is life in the old dog yet! Can’t complain too much machine is 13yrs old now!

Cheers guys will post an update after the weekend.

[Author]

Posts