[revned123]

Re: Configuring

Do you mean Zanussi?

[revned123]

Re: Configuring

I checked and double checked the wiring harness that goes from the control board to the motor several times. What about my new control module that is displaying E90, can it be re-programmed to replace the old one?

[revned123]

Re: Configuring

The motor is a brand new genuine Zanussi one which I bought not so long ago.

I think I need a new board and they’re very expensive. Could something be done with the other one displaying E90?

[revned123]

Re: Configuring

The old PCB kept displaying E50. I replaced the motor triac but that it didn’t help.

[revned123]

Re: Configuring

I do not know which machine the other board is for.

Below are the three numbers on the label which is stuck on the heatsink of the motor triac:

Type P. 451527007
Type E. 132225524
SW Ver. W4A30127

[revned123]

Re: Configuring

I never did connect this board to the washing machine. I bought it some ago and put it away to keep a spare one. Now that the control PCB on my washing machine is not working at all, I thought that I could replace the faulty board with this one.

What could other faults be related to E90?

[revned123]

Re: Configuring

electrofix wrote:first question Why?

the module is supplied by the manufacturer in configured and unconfigured as new. you need specialist software to programme it yourself

Dave

It’s displaying E90 with all the lights flashing.

[revned123]

Re: Configuring

It’s displaying E90.

[Author]

Posts