[rexford]

Re: Miele WT2670 Dryer Condenser Unit Location?

Thanks Seamy for the amazingly quick reply. I’ll check to see if there’s anything impeding the fan–it definitely blows air, but maybe it isn’t blowing as much air as it should.

The half-loads is a good hint; many people don’t read the instructions but I promise I did 🙂 We do try to keep it to 2.5Kg loads (5Kg is full) but the performance drop off is exponential. 2 items dry in 10 minutes; 4 items in 45 minutes….a half load in 18 hours. We’ve never actually let it go 18 hours; we just take it out after an hour when it is hot+wet and hang it up!

Thanks again

[rexford]

Re: Miele WT 2670 Fault F4

Thanks Dave, that was an awesome reply. It was in fact the thermostat in the air flow sensor; replacing it solved the problem. I think that it was shorting to the housing, as it worked when it was pulled out but still wired up, but not when it was in. Either way, the replacement one works in and out!
Rex

[Author]

Posts