[Rexy7]

Re: Beko DW603 No lights and no action!

Hi All,
Just thought i would give a quick update on my issue..

So i finally had a chance today to take another look and on closer inspection the transformer on the PCB has blown.. Thought i might be able to source one as they are roughly £4-5 instead of paying £50 for a new PCB however so far i haven’t been able to identify the faulty component.

Will try again tomorrow and if no luck will order the new PCB.

Alan

[Rexy7]

Re: Beko DW603 No lights and no action!

Hi Dave,
Thanks for your reply…

I have 240v at the board and also from the door switch to the board so is looking like the PCB. I didn’t check the neutral so maybe i will check that for continuity tomorrow and also lift the float switch to see if the drain pump comes on..

Pretty sure it is the PCB 🙁

Any idea where i can get a PCB for this model of dishwasher?

Thanks,

Alan

[Author]

Posts