Forum Replies Created
-
Posts
-
Re: How cold should the thin capillary into the fridge be?
Are you saying this is normal then Martin? The fridge seems markedly warmer and even on a 5 setting doesn’t seem appreciably cooler. Also never noticed this before. I have to be honest I’ve lost a bit of confidence in the food quality and am thinking that replacing the 10+ year old fridge with a new one might be the best option economically anyway!
Re: Zanussi Jetsystem 1200 – Electrical smell and no dryer h
Sorted. TCO is located half way along ducting in between terminals of the thermostat…just couldn’t see it for the terminals! Should have though its a big red button!!
Thanks again for your help this has been cheaper to fix than I had feared!
Re: Zanussi Jetsystem 1200 – Electrical smell and no dryer h
Thanks for your help so far, if the thermal cutouts have cut out, how are they reset?
Sorry to keep asking questions just trying to get thoughts together before I tackle the beast!
Re: Zanussi Jetsystem 1200 – Electrical smell and no dryer h
Have checked and belt is still on but very perished. Still seems to turen the fan spindle though, I suspect on power it wouldn’t have a very good grip! Is the element likely to be damaged if the fan hasn’t been blowing cold air over it?
Re: Partial/Slow Heating – Rangemaster 110
Thanks.
Had the oven out and tested the element (~20 ohms which was about the same for the new element I have spare). The only thing I noticed was that the foam type ‘gasket’ behind the element fixing plate was split but this may well have happened as I took the thing out! Anyhow I replaced this with the one off my spare and replaced the old element. Oven still getting hot but I’m not convinced it reached temp properly.
Where can I get or borrow a proper oven thermometer to check the temps?
