[RichB]

Re: Hoover pe 235 counterweight bolts

Thanks again.

Looks like the bolts are due in tomorrow, so we should have it back by the end of the week at the latest.

Cheers,

Richard

[RichB]

Re: Hoover pe 235 counterweight bolts

Thanks helo_75.

From the bits of bolt left on the floor, I assume they’re the self-tappers. Very thin ‘finned’, open thread. Similar looking to this:- http://shop.ukwhitegoods.co.uk/Washing+Machine+Parts/Beko/Beko+Drum+Parts/2720500300+Beko+Washing+Machine+Lower+Counterweight+Bolt.html

Are they/were they unique to this machine?
Given that the spec changed, does that make it more likely that the part will be v. difficult to get hold of?

Don’t want to throw away an otherwise reliable machine for the sake of 3 bolts…. 6 or so years old now, but other than a set of brushes last year, it hasn’t missed a beat.

Cheers,

Richard

[RichB]

Thanks again Penguin, I fitted the part this morning, and the machine is happily washing its 2nd load of the day.

Cheers,

Richard

[RichB]

That’s brilliant, thanks. All contacts are clean, so I’ll get a new fill matrix.

Thanks again for your assistance,

Richard

[Author]

Posts