[Richdrn]

Re: Identifying Bosch Classixx Dishwasher & Fault.

Thanks Paul, will lay my hands on one this week, but not entirely sure as the machine never ‘fills’ as such, it just puts water in for about 15 seconds, drain for 15 seconds, water in again etc.

Still, will try anything now!

[Richdrn]

Re: Identifying Bosch Classixx Dishwasher & Fault.

Thanks for the pointers,

Sent the PCB off for repair, its come back no better unfortunately! Still running the drain constantly and occasionally stopping to fill. Checked the operation of the main float and its micro switch, this seems ok, common switching from normally closed to open, float moving freely etc.

There is a flow meter on the inlet. There is something that looks like a pressure switch on the side of the sump, but no sign of any other contols on it.

Is there anything else in the drain pump circuit? Also, out of interest, there is a live and neutral supply disappearing up the water inlet conduit to a grey ‘box’ attached to the water connection, whats that??

Thanks again.

Rich

[Richdrn]

Re: Identifying Bosch Classixx Dishwasher & Fault.

Thanks, almost invisible number reads SGS43C12GB/08.

Nos it seems to have made up its mind on the fault condition, it is cycling between charging with cold water, and then running the drain pump. It will continue to do both even if I open the door, any thoughts?

Thanks again

Rich.

[Author]

Posts