[robeco]

Re: Fisher Paykel MW051-U Smartdrive Won’t fill or empty.

Thanks Penguin.
I’m wondering if I have reconnected the rotor wires incorrectly. The position of the wires to the sensor plug must be okay because they are fitted to the plug. What is the order for the other 3 wires going to the rotor? The red wire’s position is marked on the machine. Is it the blue or the yellow wire that plugs in next to the red?
Bob the Embarrassed

[robeco]

Re: Fisher Paykel MW051-U Smartdrive Won’t fill or empty.

Hullo again,
I bought and fitted a new rotor position sensor. The machine will now let the water flow in for a little longer, but still closes and opens the tap solenoids a few times before emitting a beep and stopping altogether. It now has a new fault code. reading from right to left, it’s: 00000100.
Any help greatly appreciated.

[robeco]

Re: Fisher Paykel MW051-U Smartdrive Won’t fill or empty.

Thanks Penguin45. I’ll check it out.

[Author]

Posts