[RobertL]

Re: F & P IW 701 Fault code 136

He left the old pump after thr first visit. It Showed minor corrosion on the winding.
After the second visit he took the pump and replaced the “main board””
But left nothing. The pump and board are both gone.

Mind you it is now going like new.

My question is does changing a worn out pump cause the board to fail?
Or has he done something odd?? Or is it “bad luck”

Thanks for all your help…
Regards
Robert.

PS do you know aything about F&P French door fridges??

[RobertL]

Thanks Mr Penguin, you have great wisdom!!!

The F&P man has been and changed the motor….
but guess what????
After he left the machine filled washed and then died completely……

He came back and tells me the Main Board has failed due to the new motor?????

This sounds crazy to me, surely the new motor would be less strain on the control board??

Even more interesting he hasn’t left the old parts after the 2nd visit….

I’m not paranoid….but….DOES THIS SOUND RIGHT??????

Mr Penguin you opinion please.

[RobertL]

Re: F & P IW 701 Fault code 136

Thanks for that.
I have cleaned and dryed the terminals and now it fills and washes.
HOWEVER…..when it’s time to pump out the water the pump runs intermitently….stop start stop start…then it stops with error 62…..

So I am kind of back where I started…Does this mean the pump is U S..
I put it into diagnostic mode and tried running the pump that way but it is still on off ing.

Any suggestions?????

[Author]

Posts