rocker

Forum Replies Created

Viewing 15 posts - 286 through 300 (of 1,132 total)
  • Author
    Posts
  • in reply to: Commercial spares #417425
    rocker
    Participant

    Re: Commercial spares

    Cheers Don,I will look into that. john

    in reply to: Smeg Di612CA9 (D/W) #416786
    rocker
    Participant

    Re: Smeg Di612CA9 (D/W)

    Steve, can you please give me the part number. john

    in reply to: Smeg Di612CA9 (D/W) #416783
    rocker
    Participant

    Re: Smeg Di612CA9 (D/W)

    Trying to look up the diverter Valve (not listed) is this built into to circulating motor. !! or part number if I missed it. .please. john

    in reply to: Smeg Di612CA9 (D/W) #416782
    rocker
    Participant

    Re: Smeg Di612CA9 (D/W)

    Thanks Steve, will look into it. john

    in reply to: Panasonic N4-16V washing machine #416690
    rocker
    Participant

    Re: Panasonic N4-16V washing machine

    I can well believe that. cheers john

    in reply to: Panasonic N4-16V washing machine #416688
    rocker
    Participant

    Re: Panasonic N4-16V washing machine

    Thanks Andy, as you say not sure about doing it for a customer either. john

    in reply to: John Lewis (W/D) 9140031102 #415773
    rocker
    Participant

    Re: John Lewis (W/D) 9140031102

    Have indeed come access before, but could not remember the related code, will note it down for future reference. thanks Martin

    in reply to: small claims court case #415341
    rocker
    Participant

    Re: small claims court case

    Try this company (http://www.thomashiggins.com) they will send a demand for payment, only cost you £2.00 has worked for me. good luck.

    in reply to: miele S6220 vac cleaner #415397
    rocker
    Participant

    Re: miele S6220 vac cleaner

    The filter is only 4 weeks old. !!

    in reply to: Bosch WVD24520GB/001 #415095
    rocker
    Participant

    Re: Bosch WVD24520GB/001

    Got the customer to run the machine on 90 degs, unable to feel heat on the glass, of course there is always a possibility it may not be the heater, but I have found 98 {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of time it is.

    in reply to: AEG L1471NOIT (914601224/01) #414965
    rocker
    Participant

    Re: AEG L1471NOIT (914601224/01)

    Cheers again Martin.

    in reply to: Diplomat ADP4520 (double oven) #414500
    rocker
    Participant

    Re: Diplomat ADP4520 (double oven)

    cheers John

    in reply to: Zanussi ZK1225 (91460600703) #414423
    rocker
    Participant

    Re: Zanussi ZK1225 (91460600703)

    Cheers Martin, I understand your advice, in hindsight I should have tested the elements, will make sure I do in future. john

    in reply to: Zanussi ZK1225 (91460600703) #414421
    rocker
    Participant

    Re: Zanussi ZK1225 (91460600703)

    Tell you the truth as the machine was dead I didn’t realise it would be the elements as in the past these type of machines have always run, but will abort but never dead!! But of course if you are telling me this could happen, I will have to return & test them.

    in reply to: Zanussi ZK1225 (91460600703) #414419
    rocker
    Participant

    Re: Zanussi ZK1225 (91460600703)

    Martin, I often put the meter across earth (cabinet) & live to test for voltage, I was feeding the earth (cabinet) via the meter to the blue cable (negitive) to the pcb. !!
    The cabinet was not live !!! so a strange fault. !!

Viewing 15 posts - 286 through 300 (of 1,132 total)