Forum Replies Created
-
Posts
-
Re: whirlpool ADG 4504 D/W
Dave just a update re dishwasher..I am not sure how to check NTC is this a type of thermister or cut out.. TOC. please advise.
cheers johnRe: whirlpool ADG 4504 D/W
Dave you are correct the model is ADP4504.Is the NTC in the base. I
bridged a plug with 2 cables feeding a component Poss NTC not sure.
this didnt make any difference. JohnRe: Bosh SRS5602GB/04 D/Wash – empty problem
Had same problem other day on full size bosch..You need to remove sump
drain outlet hose to side tank. and clean ..lay machine on its back..remove all 4 base screws..and front springs from nylon cords to door..base will lower enough to get access..this worked for me good luck
John.Re: whirlpool AWM 5125/5
Returned today done some more investigating, fault proved to be ( No postive line feed) from timer to hot inlet valve. so requires new timer.
so thanks again Dave you were correct.
JohnRe: bosch WFL 2260UK/04 condenser dryer
Greg, Thanks for advice, you and Martin both feel this is the cause, I am sure you are both right as this is on thing I didnt check…Cheers John
Re: bosch WFL 2260UK/04 condenser dryer
Martin. Thanks for reply will check this out on monday..will let you know the outcome.
johnRe: bosch WFL 2260UK/04 condenser dryer
Penguin, you are right, put the wrong ENR No in sorry, correct No is ENRWTL5100GB/05
Re: bosch WFL 2260UK/04 condenser dryer
Martin. this is a self condenser dryer…not washer/dryer
cheers johnRe: Hotpoint BFi 62 D/W
Simon46 wrote:Is pressure switch Changing state contact wise? Is the display lights flashing?
S.
Contacts working, lights are flashing… cheers simon.
John.Re: Dyson DC05 Vac cleaner
Laurence, thats exactley what I ment, I did manage to release them, by having a educated guess,and useing a long screwdriver, but many thanks for your reply, always find dysons awkward to dismantle, unless you have prior knowledge of them.
Cheers john.
