[rocker]

Re: Servis Washer Drier M9309

phidom.
think you will find the positive supply into dryer timer will be supplied via main wash timer when set for drying cycle. you will need to trace this supply.

hope this helps. john

[rocker]

Re: AEG door gasket problem

Thanks Penguin and Martin for advice have tried what you suggested apart from laying machine on its back, will give this a go.

[rocker]

Re: BOSCH SGS56E02GB/47 DISHWASHER

DAR01
I suggest you check water inlet valve first, that you have 240v in and also the valve is not faulty before buying pcb. also if you have a side tank checked this out it isnt blocked and mirco switch is operating.

john

[rocker]

Re: Hoover AL 120

thanks you all for your help..I went back to this machine today, and done some more investigation.. the drain pump was open circuit…should have tested in the 1st place ….learnt a lession..
cheers (rocker)

[rocker]

Re: hotpoint DWF50 fault code

Dragan wrote:Hi,

I have send Service Manual to You but it has returned to me.Is next address corect: ableappliance@gmail.com ?

Dragan

Oh sorry the actual email is:

ableappliances@gmail.com

thanks John (rocker). 😀

[rocker]

Re: hotpoint DWF50 fault code

Hi,

Thanks for your help Dragan, my email is ableappliance@gmail.com.

– There is a bank of lights to indicate which program you choose.Two of those lights being 40deg / 50deg, are flashing. There are no letter codes on this machine. Lights flash to indicate faults.

I’ll wait your reply, thanks again. 😀

[rocker]

MFI supply spares for diplomat washers,dont know about wed site,contact by phone.08457 959722
good luck.
you will need to find a model number for any parts
though.

[Author]

Posts