[rockm8n]

Thanks for your response, I will check that tonight. I did notice the arrow wasn’t facing directly up. Do I need a tool to tighten it?

Thanks again

[rockm8n]

Re: Zanussi ZWG1120M – Shuts off powers off after less than

Hi Seamy

Had another go tonight. No luck!

I tried different power source using extension leads. I shied away from using the multimeter as house isnt RCD protected. I did however go through all ‘power hungry’ components one by one by unplugging them individually and ‘rebooting’ the machine i.e. unplugging the machine disconnecting the motor connection,replugging and turning on. Tried this also with all pumps, door lock and heater. But same result, machine comes on chirping with happiness (barr the error message saying door is faulty etc) can turn the wheel select programs, but in 30odd seconds machine powers off and becomes lifeless. Unplugging and only after leaving for a few minutes wakes it up again..thinking the waiting is a capacitor discharging…?

Sadly thinking it is the PCB? What do you hypothesise?

Cheers

p.s. Yes I checked the plug also

[rockm8n]

Re: Zanussi ZWG1120M – Shuts off powers off after less than

Ok, Thanks Seamy

I will try with multi-meter tonight. I will also try new power outlet… electrics in the new house are questionable.

Ill let you know how I get on.

[Author]

Posts