[ron]

Re: AW23 soap hose

Steve,
I have had to return to both of my problem machines and replace soap hose’s again. Do you have any idea why the drum appears to be sitting higher on the later machines?
I have resorted to Mike’s solution of cutting off some of the tub rim on both machines, but this is not a satisfactory solution and hacking bits off someone’s new machine looks very unprofessional. Any one else experienced this problem and found a better solution?

Regards Ron.

[ron]

Re: Call Forwarding

Take a look at O2 land line offer. Transfer your BT line rental to O2 and it seems you get 2000 mins of calls to any O2 number per month. Line rental is £13.50 per month plus 50p for call divert. They tell me that all calls diverted to your own O2 mobile number will come out of the 2000 free mins. Am I missing something?
Ron

[ron]

Re: AW23 soap hose problem.

Hi Steve,
Had exactly the same fault yesterday, not even reported it yet. Replaced with hose from stock machine to keep customer happy. Some time ago I had a similar problem. The customer complaint was noisy machine. It turned out to be the tub front/rear flange banging the soap draw dispenser/hose during distribution speed when the drum has most movement. This would soon have worn a hole in the hose. I eventually cured this by replacing the left hand (single) suspension leg. Interestingly I have recently had to go back and change the other two suspension legs.
If the new soap dispenser hose I have just fitted gets damaged again I will suggest replacing all three suspension legs as well as the hose.
Regards Ron

[ron]

Re: Feb 2010 meeting

Please book me in for lunch as well Bryan. I have already booked a room and look forward to seeing you there.
Regards Ron

[ron]

Re: AW23 Knocking

Evening Jim,
Yes forgot to mention, already checked rear spring OK. On reflection, the distribution speed did seem rather slow. This may result in-uneven loads causing the tub to move too much and hit the soap box. But the oob should prevent that! Suspension legs look fine but I may recall and compare stiffness with good machine????????

[ron]

Re: ise 10

Hi guys, this is Ron (Ron’s Repairs). No Stock here. Just delivered last one today. Recession doesn’t seem to be affecting sales thankfully

[ron]

Re: September meeting @ coventry hilton hotel

No last minute panics for a discounted room this time Bryan. Room booked for Thursday night. Look forward to seeing you all again.
Ron.

[ron]

Re: Is there a new model ISE coming out soon?

Hi Baloo,
I think from your location that you may have been trying to contact me, Rons Repairs. I am close to you in Hornchurch in fact. I have had some family illness recently and have not always been able to answer the phone. However I have retuned all calls to customers who have left a message. Please try me again if you still need help. If I cant take your call, be sure to leave me a message.
Ron

[ron]

Re: ISE2 Not Taking Conditioner

I had already changed soap draw and syphoning tube which did not help so Sean sent me replacement soap box, inlet valve and hoses. Returned old parts to him for testing. (any faults Sean) This seems to have cured the fault as I have not heard from the customer since. Let us Know how you get on Jim.
Regards Ron.

[ron]

Re: Fab Softner Compartment

Thanks for that suggestion. I will check water pressure on my next visit. I have to get this sorted by Thursday if possible. Any other ideas as what I might check?
Ron

[ron]

Re: Fab Softner Compartment

Thanks for the link Sean. I have already changed the draw and syphoning tube but the problem is still the same. Fabric softener is flushing away o.k. but leaving compartment full of clean water. Any suggestions.
Regards Ron

[ron]

Re: ISE2 Not Taking Conditioner

Thanks for that link Sean. I have already changed draw and syphoning tube but the problem is still the same. Fabric softener is flushing away o.k. but leaving compartment full of clean water. Any suggestions.
Regards Ron

[ron]

Re: Warranty cards

Thanks Ken. Let me know where and when I can download the new document.
Ron

[ron]

Re: Warranty cards

I am trying to complete the pdf Warranty Registration document for my first sale of the new ISE 5 which I would then email to David. However the drop down options for model only offers the old CI555WH model no.
Advise Please! Ron

[ron]

Re: New ISE5?

Received mine this afternoon. Many thanks to Sean and all those involved for working so hard to get machines to us quickly. I am sure our customers will be delighted.
Ron

[Author]

Posts