[Rory]

Re: Hygena 8212 door lock

Thanks Dave,

email sent again.

Rory 🙂

[Rory]

Re: Hygena 8212 door lock

Yes, you can still get the spring, part number 31X2460 at £5.70 inc VAT and carriage.

An email to spares@ukwhitegoods.co.uk please if you’d like one

I’ve sent an email on Wednesday but had no reply as yet, do you know how long it takes them to respond?

Rory 😕

[Rory]

Re: Hygena 8212 door lock

Thanks Dave,

I’d gladly order the part if I was sure this was the problem. Still not sure how this small spring fits into the lock or that it has the strength to pull back the large heavy spring attached to the latch.

I assume this small spring is just to unlock the latch when the button is pressed.

I’m not sure if something else is not working as the latch will not lock into place.

Can anyone help?

Rory

[Rory]

Re: Hygena 8212 door lock

I’ve removed the outer door panel and found that a spring is loose at bottom of lock. The hook at one end has broken off. Everything else with the lock looks ok but it is not clicking shut.

The spring is approx 72mm long with dia of 8mm. Will I be able to buy one and more to the point where does it fit?

Can anyone advise?

Rory. 🙂

[Rory]

Re: Hygena 8212 door lock

Thanks Penguin45,

I’m quite used to dismantling and putting parts back together, so I’ll give it a try.

Many thanks for the warning abount the sharp edges!

Rory

[Rory]

Re: Hygena 8212 door lock

Thanks Dave,

I’m not sure how to get access to the door lock. There are quite a lot of screws on the inside of the door, all around the outside, do I have to remove all of them?

Rory

[Rory]

Re: Hygena 8212 door lock

Yes, it is APL8212.

Rory.

[Author]

Posts