[salop11]

Re: AEG Lavamat 16830 E10 Error – Drying

Thanks for the prompt response.

[salop11]

Re: Moffat MSF610W Overheating

Thanks for the additional info. The wiring looks ok, so probably the controller I would assume.

Do you know by any chance if these are still available?

Sent from my GT-I9000 using Tapatalk

[salop11]

Re: Re: Moffat MSF610W Overheating

kwatt wrote:Is there a PNC number on this machine?

You are correct, it does sound like a thermostat issue and the elements will likely be okay.

And, what was it you actually changed?

K.

As far as I know, the PNC is 949711134. I have already changed the thermostat and in isolation it appears to be working ok, i.e. it clicks over on reaching the actual temperature in the oven and appears to have good continuity.

The only other clue I have is that this problem started after something caused the oven circuit fuse to trip for the first time ever that I can remember.

Thx

Sent from my GT-I9000 using Tapatalk

[salop11]

Re: Moffat MSF610W Overheating

A quick update. Have visually checked both elements and also tested the continuity on both with a multimeter. No issues with either.

Still looking for a possible solution if anybody can help?

[Author]

Posts