[sbaz2836]

Re: Bissell ProHeat 2X 9200-E

I will fit the motor when it arrives and see if that fixes the problem. I am still concerned as to why the service manual for the 9200E states that the output voltage of the circuit board should be 250V DC when the motor currently in the cleaner has a plate stating it is 250V AC, 50Hz. The circuit diagram in the service manual (yes it is for the 9000E) shows a direct connection to the brush motor (via the micro switch). I have asked Bissell for advice on this matter but they have failed to respond.

___________________________
aliii

[Author]

Posts