[Scan]

Re: Tricity Bendix AW1053W program issues

Thanks for options. Loose suggests it can be fixed. Can you point me to a exploded diagram to guide me around? Thanks.
Rob

[Scan]

Re: Novotronic T234c. Empty container lamp comes on.

Thanks Phil.
Done as you suggested and had the hose unclipped and away from the machine and it is clear. Have operated it with hose detached and same outcome.
The pump operates at the start of each cycle and water comes out but with no great energy but that may just be the style of the pump or a sign that it is partially blocked?.
Each program starts with a pump out cycle.
If I switch between programmes when the EOC light comes on I can drop the water level sufficiently for the float switch to allow the cycle to proceed until the level of condensate lifts the float up again.
On detaching the drain hose and tilting the machine back water flows freely from the hose outlet.
I guess it now starts to get tricky.
Can I ask what you would recommend next.
Thanks.
Scan

[Scan]

Re: Fridge Thermostat for Scandinova 7054 Fridge/freezer

Thanks Clive and to everyone on the forum who helped.
Changed over the browns and all working.
Scan

[Scan]

Re: Fridge Thermostat for Scandinova 7054 Fridge/freezer

Previously this fridge worked intermitently.
Have fitted replacement VT93 thermostat to fridge part of Scandinova fridge /Freezer.
Have had it running for a few days and it does not swith off.
Tried it at various settings.

Connections are 3-BR live, 6/2-BL to compressor, 4 BR Common.

The capillary went in with no problems and is held by the plate onto the back panel within the fridge. There are no kinks I am aware of.

Switching on the thermostat brings on the compressor.

Any suggestion or more information I can provide.

Thanks
Scan

[Scan]

Re: Fridge Thermostat for Scandinova 7054 Fridge/freezer

Thanks everyone. Will digest these points and reply.
Scan

[Author]

Posts