scania19

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Whirlpool American Fridge/Freezer problem(s) #164233
    scania19
    Participant

    Re: Whirlpool American Fridge/Freezer problem(s)

    Funnily enough we have just had exactly the same problem with our fridge/freezer same model. We paid for an engineer to be advised that this was a common problem with the model. First the flashing lights and resolving this by setting the freezer to standby. This was resloved by replacing the back circuit board. Our freezer is two and half years old, the new circuit boards don’t always work with the front board, so it may be necessary to fit both (we were lucky and only had to replace the back one). This service cost £161, which included the call out.

    The ice maker not working if you are able to move the fingers that eject the ice from the tray into the ice bucket then you have a faulty mechanism. the only cure is a new unit which cost £110.00. We have since taken out insurance which cost £35.00 for 5 years may be worth giving this some consideration.

    scania19

    in reply to: Prima LPR 600 Dishwasher fault #164369
    scania19
    Participant

    Re: Prima LPR 600 Dishwasher fault

    Thanks Gregsy,
    this has just started to happen, we have always set it to run through the night and never had any condesation problems.

    You mentioned it would tell us. How?

    scania19

Viewing 2 posts - 1 through 2 (of 2 total)