[scissors]

Re: Lavamat w1259

how right you were – that did the job – thanks.

[scissors]

Re: Lavamat w1259

Checked continuity on all relevant cables – all good. Even checked the pressure chamber and operation of the pressure switch – still good.

Last resort – PCB. This appears to have a dry joint, arrowed in the pic. This belongs to a power relay for the motor (I looked it up).

There is no continuity between the pin and the track it sits on, but I can get continuity between the pin and other areas of the board.

Can I simply slap on some solder and hope for the best, or does this suggest the relay is kaput?

[scissors]

Re: Lavamat w1259

easier said than done – 9 pins connected, cable colors black/orange or orange/black – bundled with thermistor (orange/black) pump (black/orange) and pressure thingy (orange/black).

definitely not user friendly.

[scissors]

Re: Lavamat w1259

Thanks for the tip K.

I have continuity across the tacho – pins 7 & 8

not sure what the rest do but continuity also on pins 2/3 4/5 1/6

guess I need to do a visual check on pcb?

Dave

[Author]

Posts