[scooter100]

Re: Smeg DWF64SSE

spimps wrote:Always UNPLUG first, it’s underneath,tipping over to the left when viewed from front.You can then remove base.
It is connected between the circulation pump and top spray arm pipe,it’s tubular about 8 ” long.
It is held with a couple of clips which do the same job as a jubilee clip but are permanent and need to be prised off,you can’t re use them unless you have a special tool,a jubilee clip of similar size will usually do.
Best of luck.
And don’t forget UNPLUG first !!
Cheers
BG

thanks
will have a look tomorrow

[scooter100]

Re: Smeg DWF64SSE

Where abouts is the heater element?

[Author]

Posts