[scorpiouk]

Re: SMEG DISHWASHER DETERGENT DOOR NOT OPENING

Hi thanks for the reply…

I swapped the parts on the previous repiar. The PCB was changed so that we could get the washer going.

We have known that the soap dispencer needed to be changed since then.

I have now changed it.. 812890061 is fitted.

Still the door will not open. All the cable are fine but the PCB never sends the signal to open the door..

As in my previous post I now wonder if the brown and white pair could have been reconnected in reverse…

Can the washer have ran for all this time with these been wrong… what do they do…

Which way should they be connected….?

Again Thnaks for the reply.

Dave

[Author]

Posts