Scotty

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: Hotpoint Advertise Franchises! #112300
    Scotty
    Participant

    Re: Hotpoint Advertise Franchises!

    Hotpoint have started Franchises in the south side of Glasgow,despite having an abundance, of both hotpoint / indesit engineers in the area. 😡

    in reply to: Appliances in bathrooms #112492
    Scotty
    Participant

    Re: Appliances in bathrooms

    If I remember the Building Regs correctly there is nothing to prevent appliances being put into bathrooms, provided they are hard wired, i.e. no plug and socket.

    By Appliances I would assume, unless the regulations have changed drastically, in the last few years, the regulations mean a fixed appliance, designed for the purpose which of course in any case, would have to be, a certain distance from the bath or shower. Under no circumstances, I would say, a washing machine, could be considered as a suitable appliance for a bathroom. Operating the supply via a pullcord or spur does not make a washing machine a fixed or suitable appliance.

    in reply to: DASA OR NOT DASA #111341
    Scotty
    Participant

    Re: DASA OR NOT DASA

    Why not come to a meeting and find out for yourself 🙄

    e-mail me on secretary@dasanet.org.uk

    in reply to: Earth Loop Testing after repair #111279
    Scotty
    Participant

    Re: Earth Loop Testing after repair

    The HSE Guide refers only to ‘Electrical Installations’ however DASA included this as part of their ‘Quality Criteria’ Electrical Safety Tests (Section 3.1.7) which all members are expected to adhere on every repair!

    Dasa has recommended since 1993 that earth loop impedence testing should be done.
    It is now part of the dasa Quality criteria, which was done in conjunction and advice from the HSE. I think you will find that the HSE regard this test as compulsary, they explained that to members personaly at the DASA agm (one before last).

    The HSE have an information sheet on safety in domestic appliance servicing:-
    Engineering Information sheet No 35.

    ps
    I will make it available on http://www.dasanet.org.uk, for dasa members to download

    in reply to: Electrue/NESN #104742
    Scotty
    Participant

    Re: Electrue/NESN

    I have had this virus attack as well , not just NESN but my other trade accounts as well. Previousally I have set up every work provider with seperate email addresses. My private email accounts were not affected. This months attack had some of ukwhitegoods personalities names in front of them, Its not just confined to “Nic Cooper” 😕 .

    in reply to: Miele dishwasher g858 #110021
    Scotty
    Participant

    Re: Miele dishwasher g858

    Dave are their any test progs or fault finding charts on the disk
    Scott

    in reply to: Miele dishwasher g858 #110017
    Scotty
    Participant

    Re: Miele dishwasher g858

    Hi Dave

    Is this circulation valve a water valve or some kind of solonoid

    scott 💡

    in reply to: Miele dishwasher g858 #110015
    Scotty
    Participant

    Re: Miele dishwasher g858

    I thaught the half load setting was a possibility initially, but it does not seem to be the answer. I would not rule anything out. ❗

    in reply to: Miele dishwasher g858 #110012
    Scotty
    Participant

    Re: Miele dishwasher g858

    Thanks dave. The numbers i have are g858scu1plus ser num 26/63749552 😛

Viewing 9 posts - 1 through 9 (of 9 total)