Forum Replies Created
-
Posts
-
Re: Zanussi FL – 1081 washing machine problems
philfish wrote:iirc correctly the the drain pump and the valves are on the same circuit so if pump goes down it wont fill so it could still be a valve problem. i would also be looking at the pressure chamber they have a nasty habit of getting blocked or partially blocked causing some strange problems just something to check for.
phil
She does fill with water and drain if you move the dail manually, it tends to stick mostly at the very start of a cycle and at the end of the cycle. I have had the pressure vessell out and cleaned it again, (clean anyway, is this what you call the pressure chamber?)
washing is building up now and missus is naggaging for a new one!!!
SeanRe: Zanussi FL – 1081 washing machine problems
bazza500 wrote:Where does it stick?
Does it stick full of water or empty?
When you click it on does it complete the cycle then on its own?
It sticks in various postions, not all the same, if you click it on it will go for a while then need doing again or sometimes complete the cycle.
at the moment it sticks mainly on the start of the delicates/synthetics/coloured programe.
It does fill with water, and heat it too. it has even stuck on spin and the drain settings.
