[Sebypaul]

Re: Hotpoint FDL570 Flashing lights

Thank you. Any help how to troubleshoot?

[Sebypaul]

Re: Hotpoint FDL570 Flashing lights

Merry Christmas.
Managed to replace the heating element. It stopped leaking. Tried the wash cycle with Daily Wash and looked OK for an hour, I could listen to the washing sound from inside and then stopped with error code flashing Salt+Rinse Aid + Drying. Switched the machine off and on. Change it to Speed Mode, but same effect. Washed for a while and stopped with same error code. It sounds like the machine is still trying to do something, but no joy. Already spent £50!!!

[Sebypaul]

Re: Hotpoint FDL570 Flashing lights

Very helpful. Thank you.

[Sebypaul]

Re: Hotpoint FDL570 Flashing lights

Mate, the leakage is from the Heating Element. There is a tiny hole and the water leaks through that hole. Not sure whether the leakage has damaged the coil as well. Do you think it’s worth closing the hole and check again. Is the Heating element expensive to buy?

[Sebypaul]

Re: Hotpoint FDL570 Flashing lights

I opened the the bottom plastic cover of the dishwasher today and found that the leakage is from the bottom side of the machine. Looks like the motor is leaking. I unplugged the motor. Do you know how much this unit can cost?

[Sebypaul]

Re: Hotpoint FDL570 Flashing lights

I meant the bottom rubber beeding seal of the door.

[Sebypaul]

Re: Hotpoint FDL570 Flashing lights

Thanks. I can see the rubber gasket is not seated properly. I took it out and installed it back, but no joy. Is that something available to buy? If so, how much?

[Author]

Posts