[sharman]

Re: faulty bosch fridge freezer

Penguin45 wrote:The whole point of the bypass is that the sensors are foamed into the fridge or freezer insulation and are not replaceable. This is why there is no part number listing.

Regards,
Penguin45.
Fair enough. I was picking up on the post from “Demolition Dave” who claims that they can be “dug out of the foam” and replaced for approx £15. However, a week on and my fridge freezer seems to be maintaining both units at a sensible temperature, so I’ll live with it for now. Thanks again for the forum, your time and support is appreciated. 😀

[sharman]

Hi, this topic was a great help, thanks chaps! 😀 I have the same problem with my KGV 2604GB/05. I’ve shorted out the dodgy sensor which has got it working again, but would like to replace the faulty part if poss. I can’t find it listed on the Bosch support site…also, any advice on how to get it out of the foam? whereabouts is it, relative to the control panel? Incidentally, I read somewhere that the working resistance range of these sensor is 10KOhms to 50k. My faulty one reads 100k. 😕

[Author]

Posts