Forum Replies Created
-
Posts
-
Re: Indesit DI620 Dishwasher Fault lights 1 and 3 flashing
Hi all,
I’ve been pulling my hair out (what’s left of it anyway) with my DI620. Lights 1 and 3 flashing. I’ve replaced the wash pump, checked the drain pump – took it off the machine and wired to a lead to test!!
I have checked the pressure switch which operates correctly. I have checked continuity of the high pressure sensor which stays closed circuit throughout the drain and fill process. The machine bleeps after the fill process and then the flashing lights.
I’ve tested the HP sensor both by bypassing the switch and running machine with it both open circuit (disconnected) and closed circuit (bypassing switch).
I feel like I’ve exhausted all avenues on this one apart from the PCB. Could anybody offer more suggestions?
My hands are lovely and soft from all the washing up but Xmas is looming and I wanna get this fixed, or as I had read in a previous post on here, TREBUCHET!!
any assistance greatly appreciated.
