simlock

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: beko gnev221apb error light #468117
    simlock
    Participant

    Ok Dave. many thanks, looks like i’m stuck for now, really appreciate all the help.

    in reply to: beko gnev221apb error light #468115
    simlock
    Participant

    Can i put it in service mode? and let you know?. thanks

    in reply to: beko gnev221apb error light #468113
    simlock
    Participant

    Hi Dave, and the Temperature display only shows the Temperature you have set from the outside, it doesn’t show any internal temperature, drop or otherwise, which is a shame, it would help, i do get a buzzing noise, and then after a while, a sort of clunk click noise, then it all goes quite, i have been in the back as i said, there is a round pot, that hums, it get quite hot, and there is also a square radiator type thing, that get a little warm on one side. is there another way of telling, apart from a thermometer.

    in reply to: beko gnev221apb error light #468111
    simlock
    Participant

    electrofix wrote:you say the freezer has cooled when in fact you mean warmed up

    this is quite a complex unit but first what temperatures are on the display for the fridge and freezer ?

    Dave

    Hi Dave, Thanks for the reply, and yes in fact you’re correct, it has wormed, the Temperature i have set on the freezer is 24 on the freezer 6 is and the fridge is, the fridge seems fine, but the freezer is warmer, even though it’s been set to 24, temp setting, things have certainly began to defrost, i have taken the panel off at the rear of the unit, and can’t see any obvious signs of anything, there is a cooling type fan, a white one, it spins, but doesn’t look to be going amazing fast, but is spinning. thanks

Viewing 4 posts - 1 through 4 (of 4 total)