[Simonhello]

Re: AEG Lavamat Turbo 16850 not drying

Hi Kwat

Thanks for your answer. Luckily I think I have solved the problem further examination revealed what appeared to be a thermostat slotted into a rubber pipe which strangely only had one wire attached to it. My limited knowledge goes far enough to realise that two wires are required for a circuit so rummaging around the jumble df wires in the bottom of the machine I was able to locate the missing wire. The wire was much shorter than perhaps it should be and connected to the thermostat terminals with a zif connection (not reliable in my opinion ). After some fiddling I was able to restore the connection and everything is now working fine.

Cheers

Simon

[Author]

Posts