Forum Replies Created
-
AuthorPosts
-
simonr
ParticipantRe: Hotpoint 6511P Double oven – s/n 71 000808
Penguin45 wrote:Failure of the door switch, thermostat, or switch gear in the timer unit will stop the oven working.
You need a test meter and the skills to use it in order to circuit test forf the exact fault.
If you are unable to do this, please use the repairs@ option to find a UKW engineer in your area.
Power off, if you intend to pursue this yourself.
Regards,
Penguin45.Thanks.
simonr
ParticipantRe: Hotpoint 6511P Double oven – s/n 71 000808
richardable wrote:simon
does the grill work?
richardYes, grill and top oven work fine. Tried power off / back on , no change.
simonr
ParticipantRe: Hotpoint 6511P Double oven – s/n 71 000808
Simon46 wrote:Clock not set to auto is it?
No, appears not to be…
Regards
Simonsimonr
ParticipantRe: Zanussi DS11 pumping out constantly
code is 9113364
simonr
ParticipantRe: Zanussi DS11 pumping out constantly
Seem to have found the problem, there is a two position switch activated (or not ) by the level of a piece of polystyrene… one of the connections shows sign of a short circuit, disconnecting this, the pump stops and machine fills and emptys ok….
What information do I need to get hold of a replacement switch ?
simonr
ParticipantRe: Zanussi DS11 pumping out constantly
Can’t seem to find a leak… any way to override the flood protection, even temporarily ?
simonr
ParticipantRe: Zanussi DS11 pumping out constantly
Thanks Dave, I will take a look…..
simonr
ParticipantRe: Problem with NEFF B1421 oven
Element ordered Thursday, arrived Saturday , fitted it later that day all sorted ! Many thanks for the quick help, a great resource and service.
Simon
simonr
ParticipantRe: Problem with NEFF B1421 oven
thanks Dave, Martin, I’ll get one ordered ! 🙂
simonr
ParticipantRe: Problem with NEFF B1421 oven
…have checked and I have the following numbers :
ENr B1421N2GB/05 FD8310 B-AP22-7
simonr
ParticipantRe: Problem with NEFF B1421 oven
many thanks Martin.
i will check the door for the full model number.One further thing , to replace the element, can this be done entirely from inside the oven or do I need to have access to the rear of it ?
-
AuthorPosts
