Forum Replies Created
-
Posts
-
electrofix wrote:
photoyou can use an online server to host the photo and then just post a public link ( make sure the link is not to your private viewer that needs a password)
have you tried pulling the unit out to see if there are numbers anywhere else
if all that fails take element out and we should be able to find one that fits from a few measurements
Dave
Morning Dave, pulling it out was my next plan, just hoped someone might have recognised it. I know they only use 2 or 3 fan oven elements across the models, it would be just my luck to buy the wrong one 🙂
Re: Need an element for a Beko DCC5421 fan oven.
That’s excellent Dave cheers.
Time to flex the credit card again then.
Re: Need an element for a Beko DCC5421 fan oven.
Thanks Dave. Will look that up.
And the Teba one will fit in exactley the same place etc without any problems?
Re: I think I need new Carbon Brushes. Blomberg 1301ABB/Seln
Well they were the right brushes but they haven’t made a stitch of difference.
Still clicks through the cycle, doesn’t spin the motor at all, Oh well, if it worked it would be a cheap fix. Time to move on. Probably need to order a new machine tomorrow.
Re: I think I need new Carbon Brushes. Blomberg 1301ABB/Seln
Panic over, arrived today, they just forgot to email.
I can fix the machine now. Missus will be happy. I hope it is that now.
Re: I think I need new Carbon Brushes. Blomberg 1301ABB/Seln
cheers. We sometimes get our post at weird times, but reception will have contacted me,
Re: I think I need new Carbon Brushes. Blomberg 1301ABB/Seln
I bet I could plugged in, and power at the socket, but not switched on at the the machine.
But I won’t. Even that might be silly.
