snowfairyuk

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Hotpoint WMA46 Has Gone Mental! Any Advice?! (Please). #182112
    snowfairyuk
    Participant

    Re: Hotpoint WMA46 Has Gone Mental! Any Advice?! (Please).

    **** Update****


    Being a curious type of person; I took the back off the washer earlier on. I found the motor (well I think it was!) something with a huge elastic on, and the pump. No filter though! 😕 All that bloomin messing around for nowt!

    I put the pipe in a bucket and nothing came out, that must be a good thing…. ❓ I read the filter is around or behind the pump. I could not see it and didn’t feel confident enough to poke around in there.

    So I shall get somebody out, me thinks 💡

    Kindest regards,
    Scarlett.

    in reply to: Hotpoint WMA46 Has Gone Mental! Any Advice?! (Please). #182111
    snowfairyuk
    Participant

    Re: Hotpoint WMA46 Has Gone Mental! Any Advice?! (Please).

    Hi,

    thanks for your reply.

    Do I still need to do that if the drum is empty? I did manage to get it to empty itself, I just set the ‘rince & spin’ option, after switching off the water so it couldn’t fill up.

    Yes I found the two local repairers, I’m going to call one tomorrow and hopefully I can get it sorted out soon!

    Kindest regards,
    Scarlett.

    in reply to: Hotpoint WMA46 Has Gone Mental! Any Advice?! (Please). #182109
    snowfairyuk
    Participant

    Re: Hotpoint WMA46 Has Gone Mental! Any Advice?! (Please).

    Hello,

    thank you for your reply.

    Yes I forgot to mention the overfilling! You are very good! 😀

    Well I think it might actually be blocked, somewhere. I don’t know as I can’t locate the fliter (It’s not at the front and I can’t get to the back).

    I bought some new washable baby wipes and was prewashing them with my nappies when the washer broke. I noticed that the wipes were frayed all around the edges, and my nappy mesh bag was covered in large bits of cotton which had come from the edges of the cloths…. I feel like I’m answering my own question here as it was fine till then….

    And to think, I bought those cloth wipes to save money! 🙄 Now I’m going to pay out to have it mended! 😆 😆 Oh deary me! 😳

    Do you have a rough guide how much that may cost? I’ve got no money at all on me, so I’d need to take a trip to the atm before the repair man came out. I don’t want to be embarrassed by taking out not enough money….

    Luckily enough, we live in a soft water area (Leeds, West Yorkshire) but I do a service wash about once a month. With me ussing it so often (1-2 times per day) I do a 90 degree wash with nothing in the washer, sometimes with bicarb or white vinegar and it’s been great, till now!

    I thought maybe the seal might be broken, but with what you said, it sounds like it could be blocked. I do hope so! It sounds cheaper and easlier to mend!!

    Thanks again!
    Kindest regards,
    Scarlett.

Viewing 3 posts - 1 through 3 (of 3 total)