snowycat121

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: ISE W256W Rattle #402656
    snowycat121
    Participant

    Re: ISE W256W Rattle

    Panic over. Hubby back. . Put spin on 1600 he said top panel is resonating! !
    Not major problem but shouldn’t do it.
    See what engineer says eh?

    in reply to: ISE W256W Rattle #402655
    snowycat121
    Participant

    Re: ISE W256W Rattle

    P.s the lady at ise only asked if I have checked the filter which I had. No other questions

    in reply to: ISE W256W Rattle #402654
    snowycat121
    Participant

    Re: ISE W256W Rattle

    Just re-read the article on overloading and the photo…. and 10cm… I always wave my hand at the top of the load so pretty confidence I have never overloaded (phew.. husband wont kill me) 🙂

    in reply to: ISE W256W Rattle #402653
    snowycat121
    Participant

    Re: ISE W256W Rattle

    Thanks K

    Since the happy arrival I always check the load… I am concious that my hubby choice spending this level £ that it scares me to overload.. hence when I put a load in I always take an extra moment to ask myself… and double check. He would kill me if I screwed up :rolls:

    I have often put two loads on for fun.. when probably didnt need to 🙂 as the ise is a pleasure to own.. don’t mind hitting play twice in one day or a third for the bed linning on its own.

    I hope the engineer calls and I get lots of questions and not just assume they need to visit.

    Make me paranoid now.. maybe I will do another dozen washes before accepting an engineer!

    Will discuss with hubby when he returns home.. he will not be pleased to have this discussion on a “happy weekend” home!

    in reply to: ISE W256W Rattle #402652
    snowycat121
    Participant

    Re: ISE W256W Rattle

    Thanks Bryan

    Nothing in the way… or touching.. been sat cosy for past year… hubby (who is another type of engineer and very anal lol) checked all connections and flouring and all is level and smooth (if that makes sense!)…. it is really weird.. if you said that a case clip is missing then I would believe it as the top case really makes a difference if you gently put your finger on it at the time of disturbing noise. I would say there could be a tiny movement when you touch the top case (not the front case)….

    There is space either side and under the worktop.. water and waste pipes free from the unit…

    I have to say I am very careful every wash in checking all pockets… as hubby tends to have tissues in both pockets and so always double check pockets (even when he says he has checked them before putting in the laundry basket (men!).

    I am really puzzled.
    It is a lovely piece of kick for almost 1k.. a tough decision and happy we choise ise.. just pray this doesnt turn out to be a nightmare…
    Waiting for that call.. apparently the engineer comes in around 48hours.. it is nearly the weekend…

    Can I still use the machine? No other function problems…

    Hoping for some reassurance..thanks again 😕

Viewing 5 posts - 1 through 5 (of 5 total)