[Sonia]

Re: Necht Dishwasher

Thanks kheath
I’ll check that!!!

Sonia

kheath wrote:Hi

There’s a couple of faults that can give the same symptons…..

Check,

1) water valve under the sink is on and as far as you can determine that the hose has not got a kink in it.
2) oversudsing because of 3 in 1 tablets used with rinse aid ( yes it will happen that quickly)

Either of these can throw E2….however you are covered “in guarantee” and should contact your installer or Necht(see Dave’s post above) for service.

These dishwashers are not bad, yes they have the problem of oversudsing, causing the heater stat to trip out, but once you are aware of it and use the detergents correctly it should settle down and give you good service.

Plenty of manufacturers have this same problem, one day we’ll have a tablet we can reccommend to use as a detergent which won’t trigger this fault. 😉

Kevin

[Sonia]

Necht Dishwasher

hi kheath

we’ve just bought and installed a Necht WQP12-9319 dishwasher, the first time we’ve used it it started and then beeped and stopped displaying an E2 error. Do you know what that is?
Thanks
SOnia

[Author]

Posts