Forum Replies Created
-
Posts
-
Re: Electrolux ER78311 stat problem?
this is strange… The top part of the back of the fridge is frosty but the fridge still feels a little warm, i would guess that the door seals have gone but I’ve checked all around and they are fine?
Any ideas???Re: Electrolux ER78311 stat problem?
As the day has got on I’ve noticed a build up of ice up the bottom right hand side of the fridge, probably where the pipe goes up, but only condensation around the top part where i guess the evaporator is, checked the door seals and they seem fine but the fridge is still warm?
There’s lots of hot air coming off the condensor, which tells me its pulling heat out of somewhere!Re: Electrolux ER78311 stat problem?
Hi…Ok stat replaced yesterday but noticed a problem… The compressor has recently been running continuosly because of the broken stat with the fridge evap having a layer of frost on it, when I changed the stat yesterday I noticed the fridge was a little warm with no frost, today the milk is off etc and the comp is still running all the time. Freezer chilled down as quick as normal after the defrost and is fine this morning.
Its making all the usual gurgling sounds but i wonder if having the comp running for many weeks all the time with the broken stat has done something else???? I’m thinking it looks like its short of gas??? Can domestic fridges be re-gassed?
Help!!
Please!Re: Electrolux ER78311 stat problem?
Hi Thanks for that,
How easy is the replacement?, does the fridge/freezer have to be removed from the kitchen cabinet?
taRe: Electrolux ER78311 stat problem?
Hi,
The product code is 925-694-601
Electrolux list a few different datecodes for this model, I cannot see a datecode but seem to remember it was around 2000-2001Re: creda oven problem..help!
Thanks for that, i’ve ordered the stat, hopefully it will arrive so I can play over the weekend!!
Re: creda oven problem..help!
Hi, just checked the numbers, most of them are rubbed off 😡 however these are the bits I can make out
Model c366??H
Serial 33 1 00288 (the 1 is questionable)Just to re-iterate, the fan slows when the door is opened (about half speed) but it should actually stop, hopefully this may point or give a clue to what is the main problem ( no power to the element)
Thanks
Re: creda oven problem..help!
Thanks for the reply, yes I’m thinking its taken something else out when it went, the fan used to switch off completely when the door was open so I’m thinking whatever controls the fan and the element is at fault, I’m guessing the stat but don’t know if anything else is in there that may affect it, a lack of wiring diagrams doesn’t help!
