[Squealey]

Re: Hotpoint Dwf33/41 Mid Cycle Woes

Thanks for your reply, is it this bellow/microswitch that sends the signal for that electromagnetic plunger to pull back and allow the water to then rush past it from the mains?

It’s started not allowing water to fill the chamber most of the time now from start up but occasionally it will fill without a problem but then not refill the chamber half way through the cycle as before.

I did remove that bellow the other day and clean it then blew into it. The diaphragm isn’t split as it was holding pressure against my blow.

I’ll get a meter across that switch in the morning just to see that it’s actually functioning as intended or ifs got a hiccup.

That’s what I’m looking for really, the trigger to tell the chamber to fill, I just can’t seem to work it out?

Cheers

Wayne Healey

[Author]

Posts