[Stableco]

Re: Bosch SGS43A42GB/01 won’t stop filling

Just a postscript to complete this tale.

The water-level sensing magnet is easily accessed in the front of the filter slot under a circular 2cm diameter cover. (Just remove the filter in the usual way then pull the little cover up with a finger.) Wiping the magnet to remove grease and replacing it cured the problem.

We’ll not be going for the float switch mod kit as the machine has proved to be rather unreliable and there’s little confidence in it now, so we’ll be replacing it with something else in due course.

[Stableco]

Re: Bosch SGS43A42GB/01 won’t stop filling

Very many thanks indeed for your speedy help and advice. I’ll get on the case.

[Stableco]

Re: Bosch SGS43A42GB/01 won’t stop filling

Mushroom cutout is 9mm wide by 5mm high.

[Stableco]

Re: Bosch SGS43A42GB/01 won’t stop filling

Many thanks. Could you identify the location of the switch please? Is it what looks like a switch on top of the white heater assembly at the rhs or somewhere else?

[Author]

Posts